If you’re looking for a creative and sustainable way to repurpose scrap wood, making a DIY Noodle Bench is a fun and functional project. Not only is it a unique piece of furniture, but it’s also an excellent way to hone your woodworking skills. In this guide, we’ll walk you through the steps to create your very own Noodle Bench using materials you might already have lying around.
Materials Needed:
- 2×8 Board (cut down to 4 feet)
- 2×4 Wood (for legs, cut at 18 inches with 10° angle cuts on both ends)
- Sawzall
- Planer
- 80 Grit Sandpaper
- 100 Grit Sandpaper
- Pocket Hole Screws
- Wood Glue (optional)
- Wood Finish or Paint (optional)
- Miter Saw
- Drill
- Pocket Hole Jig
Step 1: Cut the Wood
Start by cutting your 2×8 board to 4 feet in length. This will serve as the seat of your bench. For the legs, cut your 2×4 wood into four pieces, each 18 inches long. Use a miter saw to make 10° angle cuts on both ends of the legs, ensuring the angles are parallel.
Step 2: Create the Worn Look
To achieve a rustic, worn look, use a sawzall and planer to distress the wood. Be creative here—you can add nicks, grooves, and uneven textures to give your bench character. Once you’ve achieved the desired look, sand the entire piece with 80 grit sandpaper to smooth out any rough spots.
Step 3: Smooth the Surface
After distressing, resand the bench with 100 grit sandpaper to smooth the surface while still maintaining the rustic appearance. This will make the bench comfortable to use without losing its handcrafted charm.
Step 4: Assemble the Bench
Attach the legs to the seat using wood glue and screws. Make sure the angled cuts on the legs are facing outward, providing stability to the bench. Clamp the legs in place while the glue dries, then reinforce with screws for added durability.
Step 5: Finish Your Bench
You can leave the wood natural for a raw, rustic look, or apply a wood finish or paint to match your home décor. Either way, your bench is ready to use once everything is dry.
DIY Noodle Bench w/Scrap Wood
If you're looking for a creative and sustainable way to repurpose scrap wood, making a DIY Noodle Bench is a fun and functional project. Not only is it a unique piece of furniture, but it's also an excellent way to hone your woodworking skills. In this guide, we'll walk you through the steps to create your very own Noodle Bench using materials you might already have lying around.
Materials
- 2x8 Board (cut down to 4 feet)
- 2x4 Wood (for legs, cut at 18 inches with 10° angle cuts on both ends)
- 80 Grit Sandpaper
- 100 Grit Sandpaper
- Pocket Hole Screws
- Wood Glue (optional)
- Wood Finish or Paint (optional)
Tools
- Sawzall
- Planer
- Pocket Hole Jig
- Miter Saw
- Drill
Instructions
Step 1: Cut the Wood
Start by cutting your 2x8 board to 4 feet in length. This will serve as the seat of your bench. For the legs, cut your 2x4 wood into four pieces, each 18 inches long. Use a miter saw to make 10° angle cuts on both ends of the legs, ensuring the angles are parallel.
Step 2: Create the Worn Look
To achieve a rustic, worn look, use a sawzall and planer to distress the wood. Be creative here—you can add nicks, grooves, and uneven textures to give your bench character. Once you've achieved the desired look, sand the entire piece with 80 grit sandpaper to smooth out any rough spots.
Step 3: Smooth the Surface
After distressing, resand the bench with 100 grit sandpaper to smooth the surface while still maintaining the rustic appearance. This will make the bench comfortable to use without losing its handcrafted charm.
Step 4: Assemble the Bench
Attach the legs to the seat using wood glue and screws. Make sure the angled cuts on the legs are facing outward, providing stability to the bench. Clamp the legs in place while the glue dries, then reinforce with screws for added durability.
Step 5: Finish Your Bench
You can leave the wood natural for a raw, rustic look, or apply a wood finish or paint to match your home décor. Either way, your bench is ready to use once everything is dry.